← Examples
Brackets & mounts

Shelf bracket for a 200 mm shelf

CADlingo generated this model from the prompt below. Open it in the studio to inspect it in 3D and view sections.

The prompt

Shelf bracket for a 200 mm deep shelf, one solid, 25 mm wide (Y=0..25). Frame: the wall is the plane X=0, the shelf rests on the plane Z=0. Wall leg: X=0..6, Z=-150..0. Shelf leg: X=0..200, Z=-6..0. A diagonal brace 6 mm thick (measured perpendicular to its length) runs from the wall leg at Z=-140 to the shelf leg at X=130, filling solid to both legs at its ends. Round the inside corner between the legs with R10. Wall leg: two Ø4.5 screw holes along X at Z=-30 and Z=-120, centred on Y=12.5, each with a 90° countersink Ø9 on the shelf side face X=6. Shelf leg: two Ø4.5 holes along Z at X=40 and X=170, centred on Y=12.5, each with a 90° countersink Ø9 at the top face Z=0.

Model facts

Overall size
200 × 25 × 150 mm
Bodies
1
Volume
78.9 cm³

Download

Check the geometry and dimensions in your own CAD tool or slicer before you make or use this part.

Open in studio

Have a part in mind?

Open an example or describe a part you actually need.

Free credits and current offers