← 예시
브래킷·마운트

200 mm 선반용 브래킷

CADlingo가 아래 프롬프트로 만든 모델입니다. 스튜디오에서 열면 3D로 살펴보고 단면을 확인할 수 있습니다.

프롬프트

Shelf bracket for a 200 mm deep shelf, one solid, 25 mm wide (Y=0..25). Frame: the wall is the plane X=0, the shelf rests on the plane Z=0. Wall leg: X=0..6, Z=-150..0. Shelf leg: X=0..200, Z=-6..0. A diagonal brace 6 mm thick (measured perpendicular to its length) runs from the wall leg at Z=-140 to the shelf leg at X=130, filling solid to both legs at its ends. Round the inside corner between the legs with R10. Wall leg: two Ø4.5 screw holes along X at Z=-30 and Z=-120, centred on Y=12.5, each with a 90° countersink Ø9 on the shelf side face X=6. Shelf leg: two Ø4.5 holes along Z at X=40 and X=170, centred on Y=12.5, each with a 90° countersink Ø9 at the top face Z=0.

모델 정보

전체 크기
200 × 25 × 150 mm
바디 수
1
부피
78.9 cm³

다운로드

제작하거나 사용하기 전에 사용하는 CAD 도구나 슬라이서에서 형상과 치수를 확인하세요.

스튜디오에서 열기

만들고 싶은 부품이 있나요?

예제를 열어보거나 실제 필요한 부품을 설명해보세요.

무료 크레딧·프로모션 안내