← 예시
브래킷·마운트

2020 알루미늄 프로파일 코너 브래킷

CADlingo가 아래 프롬프트로 만든 모델입니다. 스튜디오에서 열면 3D로 살펴보고 단면을 확인할 수 있습니다.

프롬프트

Corner bracket for 2020 aluminium extrusion, one solid, 4 mm thick. Frame: the outer corner is at the origin; leg A lies along +X (X=0..40, Y=0..20, Z=0..4), leg B stands along +Z (X=0..4, Y=0..20, Z=0..40). Two triangular side gussets, 3 mm thick, close the sides at Y=0..3 and Y=17..20; each runs from the inside corner (X=4, Z=4) out to X=36 on leg A and Z=36 on leg B. Each leg has two Ø5.5 clearance holes for M5 T-nuts on its centre line Y=10, at 12 mm and 30 mm from the outer corner. On the outer face that touches the extrusion, each leg has a locating key 6 mm wide and 1.5 mm tall along its full length, centred on Y=10, that fits the 6 mm slot; the holes pass through the key. Round the free outer corners of both legs with R3.

모델 정보

전체 크기
41.5 × 20 × 41.5 mm
바디 수
1
부피
9.3 cm³

다운로드

제작하거나 사용하기 전에 사용하는 CAD 도구나 슬라이서에서 형상과 치수를 확인하세요.

스튜디오에서 열기

만들고 싶은 부품이 있나요?

예제를 열어보거나 실제 필요한 부품을 설명해보세요.

무료 크레딧·프로모션 안내