← 예시
브래킷·마운트

판금 L 브래킷, 2 mm

CADlingo가 아래 프롬프트로 만든 모델입니다. 스튜디오에서 열면 3D로 살펴보고 단면을 확인할 수 있습니다.

프롬프트

Sheet metal L bracket, 2 mm steel, one bend of 90° with 2 mm inside bend radius, made so it can be unfolded into a flat pattern for laser cutting. Frame: the outer corner of the bend is at the origin; flange A lies along +X (outer length 50 mm), flange B rises along +Z (outer length 40 mm); width Y=0..30. Flange A has two Ø6.5 holes at X=35, Y=8 and Y=22. Flange B has two Ø6.5 holes at Z=28, Y=8 and Y=22. Round the four free outer corners with R4.

모델 정보

전체 크기
50 × 30 × 40 mm
바디 수
1
부피
4.9 cm³

다운로드

제작하거나 사용하기 전에 사용하는 CAD 도구나 슬라이서에서 형상과 치수를 확인하세요.

스튜디오에서 열기

만들고 싶은 부품이 있나요?

예제를 열어보거나 실제 필요한 부품을 설명해보세요.

무료 크레딧·프로모션 안내