← 示例
支架与安装座

钣金 L 形支架,2 mm

这是 CADlingo 根据下方提示词生成的模型。在工作台中打开,即可在 3D 中查看并检查剖面。

提示词

Sheet metal L bracket, 2 mm steel, one bend of 90° with 2 mm inside bend radius, made so it can be unfolded into a flat pattern for laser cutting. Frame: the outer corner of the bend is at the origin; flange A lies along +X (outer length 50 mm), flange B rises along +Z (outer length 40 mm); width Y=0..30. Flange A has two Ø6.5 holes at X=35, Y=8 and Y=22. Flange B has two Ø6.5 holes at Z=28, Y=8 and Y=22. Round the four free outer corners with R4.

模型信息

整体尺寸
50 × 30 × 40 mm
实体数
1
体积
4.9 cm³

下载

制作或使用前,请在您的 CAD 工具或切片软件中检查几何形状和尺寸。

在工作室中打开

有想做的零件吗?

打开一个示例,或者描述你真正需要的零件。

免费积分及当前活动