Sheet metal L bracket, 2 mm
CADlingo generated this model from the prompt below. Open it in the studio to inspect it in 3D and view sections.
The prompt
Sheet metal L bracket, 2 mm steel, one bend of 90° with 2 mm inside bend radius, made so it can be unfolded into a flat pattern for laser cutting. Frame: the outer corner of the bend is at the origin; flange A lies along +X (outer length 50 mm), flange B rises along +Z (outer length 40 mm); width Y=0..30. Flange A has two Ø6.5 holes at X=35, Y=8 and Y=22. Flange B has two Ø6.5 holes at Z=28, Y=8 and Y=22. Round the four free outer corners with R4.Model facts
- Overall size
- 50 × 30 × 40 mm
- Bodies
- 1
- Volume
- 4.9 cm³
Download
Check the geometry and dimensions in your own CAD tool or slicer before you make or use this part.




