← 示例
支架与安装座

2020 铝型材角码

这是 CADlingo 根据下方提示词生成的模型。在工作台中打开,即可在 3D 中查看并检查剖面。

提示词

Corner bracket for 2020 aluminium extrusion, one solid, 4 mm thick. Frame: the outer corner is at the origin; leg A lies along +X (X=0..40, Y=0..20, Z=0..4), leg B stands along +Z (X=0..4, Y=0..20, Z=0..40). Two triangular side gussets, 3 mm thick, close the sides at Y=0..3 and Y=17..20; each runs from the inside corner (X=4, Z=4) out to X=36 on leg A and Z=36 on leg B. Each leg has two Ø5.5 clearance holes for M5 T-nuts on its centre line Y=10, at 12 mm and 30 mm from the outer corner. On the outer face that touches the extrusion, each leg has a locating key 6 mm wide and 1.5 mm tall along its full length, centred on Y=10, that fits the 6 mm slot; the holes pass through the key. Round the free outer corners of both legs with R3.

模型信息

整体尺寸
41.5 × 20 × 41.5 mm
实体数
1
体积
9.3 cm³

下载

制作或使用前,请在您的 CAD 工具或切片软件中检查几何形状和尺寸。

在工作室中打开

有想做的零件吗?

打开一个示例,或者描述你真正需要的零件。

免费积分及当前活动