← 作例
ブラケット・マウント

2020アルミフレーム用コーナーブラケット

CADlingoが下のプロンプトから生成したモデルです。スタジオで開くと、3Dでの確認や断面表示ができます。

プロンプト

Corner bracket for 2020 aluminium extrusion, one solid, 4 mm thick. Frame: the outer corner is at the origin; leg A lies along +X (X=0..40, Y=0..20, Z=0..4), leg B stands along +Z (X=0..4, Y=0..20, Z=0..40). Two triangular side gussets, 3 mm thick, close the sides at Y=0..3 and Y=17..20; each runs from the inside corner (X=4, Z=4) out to X=36 on leg A and Z=36 on leg B. Each leg has two Ø5.5 clearance holes for M5 T-nuts on its centre line Y=10, at 12 mm and 30 mm from the outer corner. On the outer face that touches the extrusion, each leg has a locating key 6 mm wide and 1.5 mm tall along its full length, centred on Y=10, that fits the 6 mm slot; the holes pass through the key. Round the free outer corners of both legs with R3.

モデル情報

全体サイズ
41.5 × 20 × 41.5 mm
ボディ数
1
体積
9.3 cm³

ダウンロード

製作や使用の前に、お使いの CAD ツールまたはスライサーで形状と寸法を確認してください。

スタジオで開く

つくりたい部品はありますか?

サンプルを開くか、必要な部品を言葉で伝えてみてください。

無料クレジット・キャンペーン情報