奥行200 mmの棚用ブラケット
CADlingoが下のプロンプトから生成したモデルです。スタジオで開くと、3Dでの確認や断面表示ができます。
プロンプト
Shelf bracket for a 200 mm deep shelf, one solid, 25 mm wide (Y=0..25). Frame: the wall is the plane X=0, the shelf rests on the plane Z=0. Wall leg: X=0..6, Z=-150..0. Shelf leg: X=0..200, Z=-6..0. A diagonal brace 6 mm thick (measured perpendicular to its length) runs from the wall leg at Z=-140 to the shelf leg at X=130, filling solid to both legs at its ends. Round the inside corner between the legs with R10. Wall leg: two Ø4.5 screw holes along X at Z=-30 and Z=-120, centred on Y=12.5, each with a 90° countersink Ø9 on the shelf side face X=6. Shelf leg: two Ø4.5 holes along Z at X=40 and X=170, centred on Y=12.5, each with a 90° countersink Ø9 at the top face Z=0.モデル情報
- 全体サイズ
- 200 × 25 × 150 mm
- ボディ数
- 1
- 体積
- 78.9 cm³
ダウンロード
製作や使用の前に、お使いの CAD ツールまたはスライサーで形状と寸法を確認してください。




