Rack and pinion, module 1
CADlingo generated this model from the prompt below. Open it in the studio to inspect it in 3D and view sections.
The prompt
Rack and pinion, module 1, 20° involute teeth, two separate solids, meshed at the correct centre distance. Frame: the rack runs along X; its pitch line is at Y=0, Z is the face direction. Rack: X=-50..50, face width Z=0..10, solid body from Y=-10 down to its teeth (tooth tips at Y=1, roots at Y=-1.25), with two Ø3.4 mounting holes through Z at X=±40, Y=-6. Pinion: 20 teeth (pitch Ø20), face width Z=0..10, axis along Z through (X=0, Y=10), Ø5 bore with a D flat 0.5 mm deep for a motor shaft. Orient the pinion so one tooth space sits over a rack tooth at X=0 with no overlap.Model facts
- Overall size
- 100 × 30.9 × 10 mm
- Bodies
- 2
- Volume
- 12.7 cm³
Download
Check the geometry and dimensions in your own CAD tool or slicer before you make or use this part.





