← Examples
Gears & power transmission

Planetary gear set with carrier

CADlingo generated this model from the prompt below. Open it in the studio to inspect it in 3D and view sections.

The prompt

Planetary gear set as six separate solids: sun, three planets, ring and carrier, all 20° involute spur gears, module 1.5, face width 10 mm. Frame: the central axis is Z; gears sit at Z=0..10. Sun: 12 teeth, Ø8 bore. Planets: 18 teeth, Ø5.4 bore, centred 22.5 mm from the axis at 0°, 120° and 240°. Ring: 48 internal teeth, outer diameter 84 mm. Carrier: Ø60 x 5 mm plate at Z=-7..-2 with three Ø5 pins 12 mm long rising from it on the planet centres, and a Ø8 output bore on the axis.

Model facts

Overall size
84 × 84 × 17 mm
Bodies
6
Volume
47.3 cm³

Download

Check the geometry and dimensions in your own CAD tool or slicer before you make or use this part.

Open in studio

Have a part in mind?

Open an example or describe a part you actually need.

Free credits and current offers