← 作例
歯車・動力伝達

ラックとピニオン、モジュール1

CADlingoが下のプロンプトから生成したモデルです。スタジオで開くと、3Dでの確認や断面表示ができます。

プロンプト

Rack and pinion, module 1, 20° involute teeth, two separate solids, meshed at the correct centre distance. Frame: the rack runs along X; its pitch line is at Y=0, Z is the face direction. Rack: X=-50..50, face width Z=0..10, solid body from Y=-10 down to its teeth (tooth tips at Y=1, roots at Y=-1.25), with two Ø3.4 mounting holes through Z at X=±40, Y=-6. Pinion: 20 teeth (pitch Ø20), face width Z=0..10, axis along Z through (X=0, Y=10), Ø5 bore with a D flat 0.5 mm deep for a motor shaft. Orient the pinion so one tooth space sits over a rack tooth at X=0 with no overlap.

モデル情報

全体サイズ
100 × 30.9 × 10 mm
ボディ数
2
体積
12.7 cm³

ダウンロード

製作や使用の前に、お使いの CAD ツールまたはスライサーで形状と寸法を確認してください。

スタジオで開く

つくりたい部品はありますか?

サンプルを開くか、必要な部品を言葉で伝えてみてください。

無料クレジット・キャンペーン情報