← 示例
齿轮与传动

齿条与小齿轮,模数 1

这是 CADlingo 根据下方提示词生成的模型。在工作台中打开,即可在 3D 中查看并检查剖面。

提示词

Rack and pinion, module 1, 20° involute teeth, two separate solids, meshed at the correct centre distance. Frame: the rack runs along X; its pitch line is at Y=0, Z is the face direction. Rack: X=-50..50, face width Z=0..10, solid body from Y=-10 down to its teeth (tooth tips at Y=1, roots at Y=-1.25), with two Ø3.4 mounting holes through Z at X=±40, Y=-6. Pinion: 20 teeth (pitch Ø20), face width Z=0..10, axis along Z through (X=0, Y=10), Ø5 bore with a D flat 0.5 mm deep for a motor shaft. Orient the pinion so one tooth space sits over a rack tooth at X=0 with no overlap.

模型信息

整体尺寸
100 × 30.9 × 10 mm
实体数
2
体积
12.7 cm³

下载

制作或使用前,请在您的 CAD 工具或切片软件中检查几何形状和尺寸。

在工作室中打开

有想做的零件吗?

打开一个示例,或者描述你真正需要的零件。

免费积分及当前活动