랙과 피니언, 모듈 1
CADlingo가 아래 프롬프트로 만든 모델입니다. 스튜디오에서 열면 3D로 살펴보고 단면을 확인할 수 있습니다.
프롬프트
Rack and pinion, module 1, 20° involute teeth, two separate solids, meshed at the correct centre distance. Frame: the rack runs along X; its pitch line is at Y=0, Z is the face direction. Rack: X=-50..50, face width Z=0..10, solid body from Y=-10 down to its teeth (tooth tips at Y=1, roots at Y=-1.25), with two Ø3.4 mounting holes through Z at X=±40, Y=-6. Pinion: 20 teeth (pitch Ø20), face width Z=0..10, axis along Z through (X=0, Y=10), Ø5 bore with a D flat 0.5 mm deep for a motor shaft. Orient the pinion so one tooth space sits over a rack tooth at X=0 with no overlap.모델 정보
- 전체 크기
- 100 × 30.9 × 10 mm
- 바디 수
- 2
- 부피
- 12.7 cm³
다운로드
제작하거나 사용하기 전에 사용하는 CAD 도구나 슬라이서에서 형상과 치수를 확인하세요.





