Dowel drilling jig for 18 mm boards
CADlingo generated this model from the prompt below. Open it in the studio to inspect it in 3D and view sections.
The prompt
Dowel drilling jig for the edge of an 18 mm board, one solid. Frame: X runs along the board edge, the jig spans X=-60..60. A guide block X=-60..60, Y=0..24, Z=0..25 sits on the board edge (the edge is the plane Z=0, the board occupies Y=0..18 below Z=0). A fence plate X=-60..60, Y=-6..0, Z=-30..25 hangs down along the board face Y=0. Three vertical Ø8 guide holes go through the block along Z at X=-32, 0 and 32, centred on Y=9 (the middle of the board). Each guide hole has a 1 x 45° chamfer at the top. Two Ø5 clamp holes go through the fence plate along Y at X=-48 and X=48, Z=-15. Round all outside edges of the block with R1.Model facts
- Overall size
- 120 × 30 × 55 mm
- Bodies
- 1
- Volume
- 107.4 cm³
Download
Check the geometry and dimensions in your own CAD tool or slicer before you make or use this part.

