← Examples
Jigs & fixtures

Corner clamping square for glue-ups

CADlingo generated this model from the prompt below. Open it in the studio to inspect it in 3D and view sections.

The prompt

Corner clamping square for woodworking glue-ups, one solid, 15 mm thick. Frame: the inside corner is at the origin, the part lies on the XY plane at Z=0..15. It is an L shape: leg A covers X=-20..120, Y=-20..0; leg B covers X=-20..0, Y=0..120. Both inside faces (Y=0 on leg A and X=0 on leg B) are flat and square to each other. At the inside corner, cut a Ø16 relief hole centred at (X=3, Y=3) through Z so glue squeeze-out does not touch the jig. Each leg has two clamp windows 30 x 12 mm through Z, centred 10 mm from the inside face: leg A at X=40 and X=90 (Y=-10), leg B at Y=40 and Y=90 (X=-10). Round the outer corner (X=-20, Y=-20) with R10 and the two leg ends with R5.

Model facts

Overall size
140 × 140 × 15 mm
Bodies
1
Volume
54.3 cm³

Download

Check the geometry and dimensions in your own CAD tool or slicer before you make or use this part.

Open in studio

Have a part in mind?

Open an example or describe a part you actually need.

Free credits and current offers