← 예시
지그·고정구

접착용 직각 클램핑 스퀘어

CADlingo가 아래 프롬프트로 만든 모델입니다. 스튜디오에서 열면 3D로 살펴보고 단면을 확인할 수 있습니다.

프롬프트

Corner clamping square for woodworking glue-ups, one solid, 15 mm thick. Frame: the inside corner is at the origin, the part lies on the XY plane at Z=0..15. It is an L shape: leg A covers X=-20..120, Y=-20..0; leg B covers X=-20..0, Y=0..120. Both inside faces (Y=0 on leg A and X=0 on leg B) are flat and square to each other. At the inside corner, cut a Ø16 relief hole centred at (X=3, Y=3) through Z so glue squeeze-out does not touch the jig. Each leg has two clamp windows 30 x 12 mm through Z, centred 10 mm from the inside face: leg A at X=40 and X=90 (Y=-10), leg B at Y=40 and Y=90 (X=-10). Round the outer corner (X=-20, Y=-20) with R10 and the two leg ends with R5.

모델 정보

전체 크기
140 × 140 × 15 mm
바디 수
1
부피
54.3 cm³

다운로드

제작하거나 사용하기 전에 사용하는 CAD 도구나 슬라이서에서 형상과 치수를 확인하세요.

스튜디오에서 열기

만들고 싶은 부품이 있나요?

예제를 열어보거나 실제 필요한 부품을 설명해보세요.

무료 크레딧·프로모션 안내