接着用の直角クランプ定規
CADlingoが下のプロンプトから生成したモデルです。スタジオで開くと、3Dでの確認や断面表示ができます。
プロンプト
Corner clamping square for woodworking glue-ups, one solid, 15 mm thick. Frame: the inside corner is at the origin, the part lies on the XY plane at Z=0..15. It is an L shape: leg A covers X=-20..120, Y=-20..0; leg B covers X=-20..0, Y=0..120. Both inside faces (Y=0 on leg A and X=0 on leg B) are flat and square to each other. At the inside corner, cut a Ø16 relief hole centred at (X=3, Y=3) through Z so glue squeeze-out does not touch the jig. Each leg has two clamp windows 30 x 12 mm through Z, centred 10 mm from the inside face: leg A at X=40 and X=90 (Y=-10), leg B at Y=40 and Y=90 (X=-10). Round the outer corner (X=-20, Y=-20) with R10 and the two leg ends with R5.モデル情報
- 全体サイズ
- 140 × 140 × 15 mm
- ボディ数
- 1
- 体積
- 54.3 cm³
ダウンロード
製作や使用の前に、お使いの CAD ツールまたはスライサーで形状と寸法を確認してください。

