粘接用直角夹紧方尺
这是 CADlingo 根据下方提示词生成的模型。在工作台中打开,即可在 3D 中查看并检查剖面。
提示词
Corner clamping square for woodworking glue-ups, one solid, 15 mm thick. Frame: the inside corner is at the origin, the part lies on the XY plane at Z=0..15. It is an L shape: leg A covers X=-20..120, Y=-20..0; leg B covers X=-20..0, Y=0..120. Both inside faces (Y=0 on leg A and X=0 on leg B) are flat and square to each other. At the inside corner, cut a Ø16 relief hole centred at (X=3, Y=3) through Z so glue squeeze-out does not touch the jig. Each leg has two clamp windows 30 x 12 mm through Z, centred 10 mm from the inside face: leg A at X=40 and X=90 (Y=-10), leg B at Y=40 and Y=90 (X=-10). Round the outer corner (X=-20, Y=-20) with R10 and the two leg ends with R5.模型信息
- 整体尺寸
- 140 × 140 × 15 mm
- 实体数
- 1
- 体积
- 54.3 cm³
下载
制作或使用前,请在您的 CAD 工具或切片软件中检查几何形状和尺寸。

