← 示例
夹具与治具

Ø25圆棒V形块钻模

这是 CADlingo 根据下方提示词生成的模型。在工作台中打开,即可在 3D 中查看并检查剖面。

提示词

V-block drill jig for a Ø25 mm round bar, one solid. Frame: block X=-40..40, Y=-25..25, Z=0..40; the bar axis runs along X under the block. A 90° V-groove is cut into the bottom face along the full X length, centred on Y=0, 15 mm deep (30 mm wide at Z=0). Two vertical Ø6 drill guide holes go from the top face into the groove at X=-15 and X=15, Y=0, each with a Ø10 x 5 mm deep counterbore from the top for a press-fit bushing. Two M5 clearance holes go through along Z in the flat strips beside the groove, at (X=-32, Y=20) and (X=32, Y=-20).

模型信息

整体尺寸
80 × 50 × 40 mm
实体数
1
体积
138.0 cm³

下载

制作或使用前,请在您的 CAD 工具或切片软件中检查几何形状和尺寸。

在工作室中打开

有想做的零件吗?

打开一个示例,或者描述你真正需要的零件。

免费积分及当前活动