← 示例
夹具与治具

18 mm 板材圆木榫钻孔治具

这是 CADlingo 根据下方提示词生成的模型。在工作台中打开,即可在 3D 中查看并检查剖面。

提示词

Dowel drilling jig for the edge of an 18 mm board, one solid. Frame: X runs along the board edge, the jig spans X=-60..60. A guide block X=-60..60, Y=0..24, Z=0..25 sits on the board edge (the edge is the plane Z=0, the board occupies Y=0..18 below Z=0). A fence plate X=-60..60, Y=-6..0, Z=-30..25 hangs down along the board face Y=0. Three vertical Ø8 guide holes go through the block along Z at X=-32, 0 and 32, centred on Y=9 (the middle of the board). Each guide hole has a 1 x 45° chamfer at the top. Two Ø5 clamp holes go through the fence plate along Y at X=-48 and X=48, Z=-15. Round all outside edges of the block with R1.

模型信息

整体尺寸
120 × 30 × 55 mm
实体数
1
体积
107.4 cm³

下载

制作或使用前,请在您的 CAD 工具或切片软件中检查几何形状和尺寸。

在工作室中打开

有想做的零件吗?

打开一个示例,或者描述你真正需要的零件。

免费积分及当前活动