← 作例
治具・取付具

18 mm板用ダボ穴ドリルジグ

CADlingoが下のプロンプトから生成したモデルです。スタジオで開くと、3Dでの確認や断面表示ができます。

プロンプト

Dowel drilling jig for the edge of an 18 mm board, one solid. Frame: X runs along the board edge, the jig spans X=-60..60. A guide block X=-60..60, Y=0..24, Z=0..25 sits on the board edge (the edge is the plane Z=0, the board occupies Y=0..18 below Z=0). A fence plate X=-60..60, Y=-6..0, Z=-30..25 hangs down along the board face Y=0. Three vertical Ø8 guide holes go through the block along Z at X=-32, 0 and 32, centred on Y=9 (the middle of the board). Each guide hole has a 1 x 45° chamfer at the top. Two Ø5 clamp holes go through the fence plate along Y at X=-48 and X=48, Z=-15. Round all outside edges of the block with R1.

モデル情報

全体サイズ
120 × 30 × 55 mm
ボディ数
1
体積
107.4 cm³

ダウンロード

製作や使用の前に、お使いの CAD ツールまたはスライサーで形状と寸法を確認してください。

スタジオで開く

つくりたい部品はありますか?

サンプルを開くか、必要な部品を言葉で伝えてみてください。

無料クレジット・キャンペーン情報