Two-half Ø32 pipe clamp
CADlingo generated this model from the prompt below. Open it in the studio to inspect it in 3D and view sections.
The prompt
Two-half pipe clamp for a Ø32 tube, as two separate solids. Frame: tube axis along Y at X=0, Z=32; clamp 20 mm wide along Y (Y=-10..10). Lower half: base flange X=-40..40, Z=0..8 with two Ø6.6 M6 clearance holes along Z at X=±32; a saddle block X=-22..22, Z=8..31.5 with a Ø32 half bore on the tube axis; and two ears X=±(22..32), Z=20..31.5, each with a Ø6.6 hole along Z at X=±27. Upper half: a cap X=-22..22, Z=32.5..52 with the matching Ø32 half bore, and two ears X=±(22..32), Z=32.5..44 with Ø6.6 holes at X=±27 aligned with the lower ones. The 1 mm gap between Z=31.5 and Z=32.5 is the clamping gap.Model facts
- Overall size
- 80 × 20 × 52 mm
- Bodies
- 2
- Volume
- 42.3 cm³
Download
Check the geometry and dimensions in your own CAD tool or slicer before you make or use this part.



