Ø32 반할 파이프 클램프
CADlingo가 아래 프롬프트로 만든 모델입니다. 스튜디오에서 열면 3D로 살펴보고 단면을 확인할 수 있습니다.
프롬프트
Two-half pipe clamp for a Ø32 tube, as two separate solids. Frame: tube axis along Y at X=0, Z=32; clamp 20 mm wide along Y (Y=-10..10). Lower half: base flange X=-40..40, Z=0..8 with two Ø6.6 M6 clearance holes along Z at X=±32; a saddle block X=-22..22, Z=8..31.5 with a Ø32 half bore on the tube axis; and two ears X=±(22..32), Z=20..31.5, each with a Ø6.6 hole along Z at X=±27. Upper half: a cap X=-22..22, Z=32.5..52 with the matching Ø32 half bore, and two ears X=±(22..32), Z=32.5..44 with Ø6.6 holes at X=±27 aligned with the lower ones. The 1 mm gap between Z=31.5 and Z=32.5 is the clamping gap.모델 정보
- 전체 크기
- 80 × 20 × 52 mm
- 바디 수
- 2
- 부피
- 42.3 cm³
다운로드
제작하거나 사용하기 전에 사용하는 CAD 도구나 슬라이서에서 형상과 치수를 확인하세요.



