호스 바브 레듀서, 12→8 mm
CADlingo가 아래 프롬프트로 만든 모델입니다. 스튜디오에서 열면 3D로 살펴보고 단면을 확인할 수 있습니다.
프롬프트
Straight hose barb reducer from 12 mm to 8 mm hose, one solid. Frame: the axis is Z. Make the round part by drawing the whole outer profile in the XZ plane and revolving it 360° around Z, so all barbs and both ends are one solid: small end Z=-25..0 for 8 mm inside-diameter hose with three barbs, each 8 mm long, rising from Ø7.2 at its leading edge to Ø9 at its back and then stepping straight down to Ø7.2 (first barb starts at the tip Z=-25, the remaining 1 mm up to Z=0 is a Ø9 land); large end Z=8..33 for 12 mm hose with three barbs from Ø11 to Ø13.5, the first starting at the tip Z=33 (a Ø11 land fills the last 1 mm down to Z=8). Join a hex 17 mm across flats at Z=0..8 to that revolved body. Finally cut the through bore: Ø8 from Z=0 to Z=33 and Ø5 from Z=-25 to Z=0.모델 정보
- 전체 크기
- 19.6 × 17 × 58 mm
- 바디 수
- 1
- 부피
- 4.1 cm³
다운로드
제작하거나 사용하기 전에 사용하는 CAD 도구나 슬라이서에서 형상과 치수를 확인하세요.



