← 示例
管道与软管配件

宝塔接头变径,12 转 8 mm

这是 CADlingo 根据下方提示词生成的模型。在工作台中打开,即可在 3D 中查看并检查剖面。

提示词

Straight hose barb reducer from 12 mm to 8 mm hose, one solid. Frame: the axis is Z. Make the round part by drawing the whole outer profile in the XZ plane and revolving it 360° around Z, so all barbs and both ends are one solid: small end Z=-25..0 for 8 mm inside-diameter hose with three barbs, each 8 mm long, rising from Ø7.2 at its leading edge to Ø9 at its back and then stepping straight down to Ø7.2 (first barb starts at the tip Z=-25, the remaining 1 mm up to Z=0 is a Ø9 land); large end Z=8..33 for 12 mm hose with three barbs from Ø11 to Ø13.5, the first starting at the tip Z=33 (a Ø11 land fills the last 1 mm down to Z=8). Join a hex 17 mm across flats at Z=0..8 to that revolved body. Finally cut the through bore: Ø8 from Z=0 to Z=33 and Ø5 from Z=-25 to Z=0.

模型信息

整体尺寸
19.6 × 17 × 58 mm
实体数
1
体积
4.1 cm³

下载

制作或使用前,请在您的 CAD 工具或切片软件中检查几何形状和尺寸。

在工作室中打开

有想做的零件吗?

打开一个示例,或者描述你真正需要的零件。

免费积分及当前活动