← 作例
配管・ホース部品

Ø32 二つ割りパイプクランプ

CADlingoが下のプロンプトから生成したモデルです。スタジオで開くと、3Dでの確認や断面表示ができます。

プロンプト

Two-half pipe clamp for a Ø32 tube, as two separate solids. Frame: tube axis along Y at X=0, Z=32; clamp 20 mm wide along Y (Y=-10..10). Lower half: base flange X=-40..40, Z=0..8 with two Ø6.6 M6 clearance holes along Z at X=±32; a saddle block X=-22..22, Z=8..31.5 with a Ø32 half bore on the tube axis; and two ears X=±(22..32), Z=20..31.5, each with a Ø6.6 hole along Z at X=±27. Upper half: a cap X=-22..22, Z=32.5..52 with the matching Ø32 half bore, and two ears X=±(22..32), Z=32.5..44 with Ø6.6 holes at X=±27 aligned with the lower ones. The 1 mm gap between Z=31.5 and Z=32.5 is the clamping gap.

モデル情報

全体サイズ
80 × 20 × 52 mm
ボディ数
2
体積
42.3 cm³

ダウンロード

製作や使用の前に、お使いの CAD ツールまたはスライサーで形状と寸法を確認してください。

スタジオで開く

つくりたい部品はありますか?

サンプルを開くか、必要な部品を言葉で伝えてみてください。

無料クレジット・キャンペーン情報