← 作例
配管・ホース部品

Ø22配管用片サドル

CADlingoが下のプロンプトから生成したモデルです。スタジオで開くと、3Dでの確認や断面表示ができます。

プロンプト

One-hole pipe strap for a Ø22 copper pipe, made as one solid from 2 mm sheet. Build it as one profile extruded along X: in the YZ plane, draw a 2 mm thick strip that follows this centreline: start at the foot end (Y=-19, Z=1), run along Z=1 to Y=-12, up the line Y=-12 to Z=11, over the top as a half circle of radius 12 centred at (Y=0, Z=11), down the line Y=12 to Z=1, then along Z=1 to Y=35. Extrude this profile 16 mm along X (X=-8..8) so the strap wraps over a pipe whose axis is X at Y=0, Z=11, resting on the wall plane Z=0. Then cut one Ø5 screw hole through the flat tab at Y=26, X=0, and round the two tab-end corners at Y=35 with R8.

モデル情報

全体サイズ
16 × 54 × 24 mm
ボディ数
1
体積
2.7 cm³

ダウンロード

製作や使用の前に、お使いの CAD ツールまたはスライサーで形状と寸法を確認してください。

スタジオで開く

つくりたい部品はありますか?

サンプルを開くか、必要な部品を言葉で伝えてみてください。

無料クレジット・キャンペーン情報