← 예시
메이커·전자기기

M20 글랜드 구멍 정션 박스와 뚜껑

CADlingo가 아래 프롬프트로 만든 모델입니다. 스튜디오에서 열면 3D로 살펴보고 단면을 확인할 수 있습니다.

프롬프트

Wall-mounted junction box with a screw-on lid, two separate solids. Frame: box X=-50..50, Y=-50..50, Z=0..50, walls 3 mm, floor 3 mm, outer vertical edges rounded R4. Four lid screw bosses Ø8 in the inside corners, centred at (±42, ±42), full height Z=3..50, each with a Ø2.8 pilot hole 12 mm deep from the top for M3.5 screws. Two Ø20.5 cable gland holes for M20 glands go through the wall at Y=-50, centred at X=±22, Z=25. Two Ø4.5 wall mounting holes go through the floor at (0, ±30), each with a 90° countersink Ø9 on the inside face. Lid: a 4 mm plate X=-50..50, Y=-50..50, Z=50..54 with R4 corners and four Ø3.8 clearance holes on the boss centres, each with a Ø7 x 2 mm counterbore from the top.

모델 정보

전체 크기
100 × 100 × 54 mm
바디 수
2
부피
135.7 cm³

다운로드

제작하거나 사용하기 전에 사용하는 CAD 도구나 슬라이서에서 형상과 치수를 확인하세요.

스튜디오에서 열기

만들고 싶은 부품이 있나요?

예제를 열어보거나 실제 필요한 부품을 설명해보세요.

무료 크레딧·프로모션 안내