← 示例
创客与电子

带 M20 格兰头孔的接线盒及盖

这是 CADlingo 根据下方提示词生成的模型。在工作台中打开,即可在 3D 中查看并检查剖面。

提示词

Wall-mounted junction box with a screw-on lid, two separate solids. Frame: box X=-50..50, Y=-50..50, Z=0..50, walls 3 mm, floor 3 mm, outer vertical edges rounded R4. Four lid screw bosses Ø8 in the inside corners, centred at (±42, ±42), full height Z=3..50, each with a Ø2.8 pilot hole 12 mm deep from the top for M3.5 screws. Two Ø20.5 cable gland holes for M20 glands go through the wall at Y=-50, centred at X=±22, Z=25. Two Ø4.5 wall mounting holes go through the floor at (0, ±30), each with a 90° countersink Ø9 on the inside face. Lid: a 4 mm plate X=-50..50, Y=-50..50, Z=50..54 with R4 corners and four Ø3.8 clearance holes on the boss centres, each with a Ø7 x 2 mm counterbore from the top.

模型信息

整体尺寸
100 × 100 × 54 mm
实体数
2
体积
135.7 cm³

下载

制作或使用前,请在您的 CAD 工具或切片软件中检查几何形状和尺寸。

在工作室中打开

有想做的零件吗?

打开一个示例,或者描述你真正需要的零件。

免费积分及当前活动