← 示例
创客与电子

卡扣盖树莓派5外壳

这是 CADlingo 根据下方提示词生成的模型。在工作台中打开,即可在 3D 中查看并检查剖面。

提示词

Raspberry Pi 5 enclosure as two solids: base and snap-on lid. Use the Raspberry Pi 5 board outline and mounting-hole positions. Base: 2 mm walls, 2 mm floor, 1 mm clearance around the board, inner height 22 mm, four standoffs 5 mm tall with Ø2.5 holes matching the board's M2.5 mounting holes. Openings in the walls for the USB-C power port, both micro-HDMI ports, the USB ports and the Ethernet port at the board's positions. Slotted vents on both long sides. Lid: 2 mm plate with a lip that snaps inside the base walls.

模型信息

整体尺寸
91 × 62 × 26 mm
实体数
2
体积
34.4 cm³

下载

制作或使用前,请在您的 CAD 工具或切片软件中检查几何形状和尺寸。

在工作室中打开

有想做的零件吗?

打开一个示例,或者描述你真正需要的零件。

免费积分及当前活动