← Examples
Maker & electronics

Raspberry Pi 5 enclosure with snap-on lid

CADlingo generated this model from the prompt below. Open it in the studio to inspect it in 3D and view sections.

The prompt

Raspberry Pi 5 enclosure as two solids: base and snap-on lid. Use the Raspberry Pi 5 board outline and mounting-hole positions. Base: 2 mm walls, 2 mm floor, 1 mm clearance around the board, inner height 22 mm, four standoffs 5 mm tall with Ø2.5 holes matching the board's M2.5 mounting holes. Openings in the walls for the USB-C power port, both micro-HDMI ports, the USB ports and the Ethernet port at the board's positions. Slotted vents on both long sides. Lid: 2 mm plate with a lip that snaps inside the base walls.

Model facts

Overall size
91 × 62 × 26 mm
Bodies
2
Volume
34.4 cm³

Download

Check the geometry and dimensions in your own CAD tool or slicer before you make or use this part.

Open in studio

Have a part in mind?

Open an example or describe a part you actually need.

Free credits and current offers