스냅 뚜껑 라즈베리파이 5 케이스
CADlingo가 아래 프롬프트로 만든 모델입니다. 스튜디오에서 열면 3D로 살펴보고 단면을 확인할 수 있습니다.
프롬프트
Raspberry Pi 5 enclosure as two solids: base and snap-on lid. Use the Raspberry Pi 5 board outline and mounting-hole positions. Base: 2 mm walls, 2 mm floor, 1 mm clearance around the board, inner height 22 mm, four standoffs 5 mm tall with Ø2.5 holes matching the board's M2.5 mounting holes. Openings in the walls for the USB-C power port, both micro-HDMI ports, the USB ports and the Ethernet port at the board's positions. Slotted vents on both long sides. Lid: 2 mm plate with a lip that snaps inside the base walls.모델 정보
- 전체 크기
- 91 × 62 × 26 mm
- 바디 수
- 2
- 부피
- 34.4 cm³
다운로드
제작하거나 사용하기 전에 사용하는 CAD 도구나 슬라이서에서 형상과 치수를 확인하세요.





