← 作例
メイカー・電子機器

スナップ式ふた付きRaspberry Pi 5ケース

CADlingoが下のプロンプトから生成したモデルです。スタジオで開くと、3Dでの確認や断面表示ができます。

プロンプト

Raspberry Pi 5 enclosure as two solids: base and snap-on lid. Use the Raspberry Pi 5 board outline and mounting-hole positions. Base: 2 mm walls, 2 mm floor, 1 mm clearance around the board, inner height 22 mm, four standoffs 5 mm tall with Ø2.5 holes matching the board's M2.5 mounting holes. Openings in the walls for the USB-C power port, both micro-HDMI ports, the USB ports and the Ethernet port at the board's positions. Slotted vents on both long sides. Lid: 2 mm plate with a lip that snaps inside the base walls.

モデル情報

全体サイズ
91 × 62 × 26 mm
ボディ数
2
体積
34.4 cm³

ダウンロード

製作や使用の前に、お使いの CAD ツールまたはスライサーで形状と寸法を確認してください。

スタジオで開く

つくりたい部品はありますか?

サンプルを開くか、必要な部品を言葉で伝えてみてください。

無料クレジット・キャンペーン情報