← 示例
创客与电子

一体打印铰链

这是 CADlingo 根据下方提示词生成的模型。在工作台中打开,即可在 3D 中查看并检查剖面。

提示词

Print-in-place hinge, two separate solids that move without assembly. Frame: the hinge axis is X at Y=0, Z=4; the knuckle barrel is Ø8 along X=0..40. Leaf A is a 3 mm plate X=0..40, Y=-30..-4, Z=0..3 joined to knuckles 1, 3 and 5; leaf B is a 3 mm plate X=0..40, Y=4..30, Z=0..3 joined to knuckles 2 and 4. Five knuckles, each 7.2 mm long along X with 0.5 mm gaps between them. Leaf A carries a Ø4 pin through all five knuckles; the knuckles of leaf B have a Ø4.8 bore around the pin (0.4 mm radial clearance). Each leaf has two Ø3.5 countersunk screw holes (90°, Ø7 head) at X=8 and X=32, centred on the leaf width.

模型信息

整体尺寸
40 × 60 × 8 mm
实体数
2
体积
7.9 cm³

下载

制作或使用前,请在您的 CAD 工具或切片软件中检查几何形状和尺寸。

在工作室中打开

有想做的零件吗?

打开一个示例,或者描述你真正需要的零件。

免费积分及当前活动