프린트 인 플레이스 경첩
CADlingo가 아래 프롬프트로 만든 모델입니다. 스튜디오에서 열면 3D로 살펴보고 단면을 확인할 수 있습니다.
프롬프트
Print-in-place hinge, two separate solids that move without assembly. Frame: the hinge axis is X at Y=0, Z=4; the knuckle barrel is Ø8 along X=0..40. Leaf A is a 3 mm plate X=0..40, Y=-30..-4, Z=0..3 joined to knuckles 1, 3 and 5; leaf B is a 3 mm plate X=0..40, Y=4..30, Z=0..3 joined to knuckles 2 and 4. Five knuckles, each 7.2 mm long along X with 0.5 mm gaps between them. Leaf A carries a Ø4 pin through all five knuckles; the knuckles of leaf B have a Ø4.8 bore around the pin (0.4 mm radial clearance). Each leaf has two Ø3.5 countersunk screw holes (90°, Ø7 head) at X=8 and X=32, centred on the leaf width.모델 정보
- 전체 크기
- 40 × 60 × 8 mm
- 바디 수
- 2
- 부피
- 7.9 cm³
다운로드
제작하거나 사용하기 전에 사용하는 CAD 도구나 슬라이서에서 형상과 치수를 확인하세요.





