3D 프린팅 공차 테스트
CADlingo가 아래 프롬프트로 만든 모델입니다. 스튜디오에서 열면 3D로 살펴보고 단면을 확인할 수 있습니다.
프롬프트
3D printing clearance test coupon, six separate solids: one plate and five loose round pegs printed in place. Frame: plate X=0..80, Y=0..20, Z=0..6. Five Ø10 through holes in the plate along X at X=10, 25, 40, 55, 70, Y=10. In each hole a peg, Z=0..10, with a diameter 10 minus 2 x the clearance, giving radial clearances of 0.1, 0.2, 0.3, 0.4 and 0.5 mm from left to right (peg Ø9.8, 9.6, 9.4, 9.2, 9.0). Each peg has a Ø14 x 1 mm cap at Z=7..8, 1 mm above the plate, so it cannot drop through the hole; the top of the peg Z=8..10 stays plain. Engrave the clearance value (0.1 to 0.5) 0.6 mm deep on the plate top face below each hole at Y=3.5, text height 3.모델 정보
- 전체 크기
- 80 × 20 × 10 mm
- 바디 수
- 6
- 부피
- 11.1 cm³
다운로드
제작하거나 사용하기 전에 사용하는 CAD 도구나 슬라이서에서 형상과 치수를 확인하세요.





