← 作例
メイカー・電子機器

3Dプリントのクリアランステスト

CADlingoが下のプロンプトから生成したモデルです。スタジオで開くと、3Dでの確認や断面表示ができます。

プロンプト

3D printing clearance test coupon, six separate solids: one plate and five loose round pegs printed in place. Frame: plate X=0..80, Y=0..20, Z=0..6. Five Ø10 through holes in the plate along X at X=10, 25, 40, 55, 70, Y=10. In each hole a peg, Z=0..10, with a diameter 10 minus 2 x the clearance, giving radial clearances of 0.1, 0.2, 0.3, 0.4 and 0.5 mm from left to right (peg Ø9.8, 9.6, 9.4, 9.2, 9.0). Each peg has a Ø14 x 1 mm cap at Z=7..8, 1 mm above the plate, so it cannot drop through the hole; the top of the peg Z=8..10 stays plain. Engrave the clearance value (0.1 to 0.5) 0.6 mm deep on the plate top face below each hole at Y=3.5, text height 3.

モデル情報

全体サイズ
80 × 20 × 10 mm
ボディ数
6
体積
11.1 cm³

ダウンロード

製作や使用の前に、お使いの CAD ツールまたはスライサーで形状と寸法を確認してください。

スタジオで開く

つくりたい部品はありますか?

サンプルを開くか、必要な部品を言葉で伝えてみてください。

無料クレジット・キャンペーン情報