3D 打印间隙测试件
这是 CADlingo 根据下方提示词生成的模型。在工作台中打开,即可在 3D 中查看并检查剖面。
提示词
3D printing clearance test coupon, six separate solids: one plate and five loose round pegs printed in place. Frame: plate X=0..80, Y=0..20, Z=0..6. Five Ø10 through holes in the plate along X at X=10, 25, 40, 55, 70, Y=10. In each hole a peg, Z=0..10, with a diameter 10 minus 2 x the clearance, giving radial clearances of 0.1, 0.2, 0.3, 0.4 and 0.5 mm from left to right (peg Ø9.8, 9.6, 9.4, 9.2, 9.0). Each peg has a Ø14 x 1 mm cap at Z=7..8, 1 mm above the plate, so it cannot drop through the hole; the top of the peg Z=8..10 stays plain. Engrave the clearance value (0.1 to 0.5) 0.6 mm deep on the plate top face below each hole at Y=3.5, text height 3.模型信息
- 整体尺寸
- 80 × 20 × 10 mm
- 实体数
- 6
- 体积
- 11.1 cm³
下载
制作或使用前,请在您的 CAD 工具或切片软件中检查几何形状和尺寸。





