← 作例
メイカー・電子機器

一体造形ヒンジ

CADlingoが下のプロンプトから生成したモデルです。スタジオで開くと、3Dでの確認や断面表示ができます。

プロンプト

Print-in-place hinge, two separate solids that move without assembly. Frame: the hinge axis is X at Y=0, Z=4; the knuckle barrel is Ø8 along X=0..40. Leaf A is a 3 mm plate X=0..40, Y=-30..-4, Z=0..3 joined to knuckles 1, 3 and 5; leaf B is a 3 mm plate X=0..40, Y=4..30, Z=0..3 joined to knuckles 2 and 4. Five knuckles, each 7.2 mm long along X with 0.5 mm gaps between them. Leaf A carries a Ø4 pin through all five knuckles; the knuckles of leaf B have a Ø4.8 bore around the pin (0.4 mm radial clearance). Each leaf has two Ø3.5 countersunk screw holes (90°, Ø7 head) at X=8 and X=32, centred on the leaf width.

モデル情報

全体サイズ
40 × 60 × 8 mm
ボディ数
2
体積
7.9 cm³

ダウンロード

製作や使用の前に、お使いの CAD ツールまたはスライサーで形状と寸法を確認してください。

スタジオで開く

つくりたい部品はありますか?

サンプルを開くか、必要な部品を言葉で伝えてみてください。

無料クレジット・キャンペーン情報