← 作例
メイカー・電子機器

M20グランド穴付きジャンクションボックスとふた

CADlingoが下のプロンプトから生成したモデルです。スタジオで開くと、3Dでの確認や断面表示ができます。

プロンプト

Wall-mounted junction box with a screw-on lid, two separate solids. Frame: box X=-50..50, Y=-50..50, Z=0..50, walls 3 mm, floor 3 mm, outer vertical edges rounded R4. Four lid screw bosses Ø8 in the inside corners, centred at (±42, ±42), full height Z=3..50, each with a Ø2.8 pilot hole 12 mm deep from the top for M3.5 screws. Two Ø20.5 cable gland holes for M20 glands go through the wall at Y=-50, centred at X=±22, Z=25. Two Ø4.5 wall mounting holes go through the floor at (0, ±30), each with a 90° countersink Ø9 on the inside face. Lid: a 4 mm plate X=-50..50, Y=-50..50, Z=50..54 with R4 corners and four Ø3.8 clearance holes on the boss centres, each with a Ø7 x 2 mm counterbore from the top.

モデル情報

全体サイズ
100 × 100 × 54 mm
ボディ数
2
体積
135.7 cm³

ダウンロード

製作や使用の前に、お使いの CAD ツールまたはスライサーで形状と寸法を確認してください。

スタジオで開く

つくりたい部品はありますか?

サンプルを開くか、必要な部品を言葉で伝えてみてください。

無料クレジット・キャンペーン情報