← 作例
メイカー・電子機器

70 × 50 mm基板用ケースとふた

CADlingoが下のプロンプトから生成したモデルです。スタジオで開くと、3Dでの確認や断面表示ができます。

プロンプト

Enclosure for a 70 x 50 mm prototype PCB, two separate solids: base and lid. Frame: base X=-40..40, Y=-30..30, Z=0..28, walls 2 mm, floor 2 mm, outer vertical edges rounded R3. Inside the base, four standoffs Ø6 x 5 mm tall rise from the floor (Z=2..7) on a 66 x 46 mm pattern centred on the origin, each with a Ø2.5 pilot hole 5 mm deep for M3 screws. The PCB sits on the standoffs at Z=7. The short wall at X=-40 has a 12 x 7 mm rectangular opening for a USB cable centred at Y=0, Z=11. The long wall at Y=-30 has a row of five vent slots 2 x 14 mm, vertical, centred at Z=18, spaced 6 mm along X around X=0. Lid: a 2 mm plate X=-40..40, Y=-30..30, Z=28..30 with the same R3 corners, plus a 2 mm tall locating lip under it (Z=26..28) that fits inside the walls with 0.2 mm clearance per side (lip outer 75.6 x 55.6, 1.5 mm thick).

モデル情報

全体サイズ
80 × 60 × 30 mm
ボディ数
2
体積
33.9 cm³

ダウンロード

製作や使用の前に、お使いの CAD ツールまたはスライサーで形状と寸法を確認してください。

スタジオで開く

つくりたい部品はありますか?

サンプルを開くか、必要な部品を言葉で伝えてみてください。

無料クレジット・キャンペーン情報