← 示例
创客与电子

70 × 50 mm PCB 外壳及盖

这是 CADlingo 根据下方提示词生成的模型。在工作台中打开,即可在 3D 中查看并检查剖面。

提示词

Enclosure for a 70 x 50 mm prototype PCB, two separate solids: base and lid. Frame: base X=-40..40, Y=-30..30, Z=0..28, walls 2 mm, floor 2 mm, outer vertical edges rounded R3. Inside the base, four standoffs Ø6 x 5 mm tall rise from the floor (Z=2..7) on a 66 x 46 mm pattern centred on the origin, each with a Ø2.5 pilot hole 5 mm deep for M3 screws. The PCB sits on the standoffs at Z=7. The short wall at X=-40 has a 12 x 7 mm rectangular opening for a USB cable centred at Y=0, Z=11. The long wall at Y=-30 has a row of five vent slots 2 x 14 mm, vertical, centred at Z=18, spaced 6 mm along X around X=0. Lid: a 2 mm plate X=-40..40, Y=-30..30, Z=28..30 with the same R3 corners, plus a 2 mm tall locating lip under it (Z=26..28) that fits inside the walls with 0.2 mm clearance per side (lip outer 75.6 x 55.6, 1.5 mm thick).

模型信息

整体尺寸
80 × 60 × 30 mm
实体数
2
体积
33.9 cm³

下载

制作或使用前,请在您的 CAD 工具或切片软件中检查几何形状和尺寸。

在工作室中打开

有想做的零件吗?

打开一个示例,或者描述你真正需要的零件。

免费积分及当前活动