Split shaft collar for an 8 mm shaft
CADlingo generated this model from the prompt below. Open it in the studio to inspect it in 3D and view sections.
The prompt
Split clamping shaft collar for an 8 mm shaft, one solid. Frame: the shaft axis is Z. Ring: outer Ø22, bore Ø8, height Z=0..10, 0.5 x 45° chamfers on all four circular edges. A 1 mm wide slit cuts through one side of the ring along the plane X=0 for Y>0 (from the bore to the outside), full height. An M3 clamp screw crosses the slit tangentially along X at Y=7, Z=5: Ø3.4 clearance hole with a Ø6 x 3 mm counterbore on the X+ side, and a Ø2.5 tap-drill hole on the X- side for M3 threads.Model facts
- Overall size
- 22 × 22 × 10 mm
- Bodies
- 1
- Volume
- 3.0 cm³
Download
Check the geometry and dimensions in your own CAD tool or slicer before you make or use this part.





