Pillow block for a 608 bearing
CADlingo generated this model from the prompt below. Open it in the studio to inspect it in 3D and view sections.
The prompt
Pillow block bearing housing for one 608 ball bearing (Ø22 outside, 7 mm wide, Ø8 bore), one solid. Frame: the shaft axis is X, at Y=0, Z=20; the base sits on Z=0. Base plate: Y=-30..30, X=-6..6, Z=0..6. Housing: a cylinder Ø34 along X, X=-6..6, centred on the shaft axis, joined to the base by a web Y=-17..17, X=-6..6, Z=0..20. Bearing seat: Ø22 bore 7 mm deep from the face X=-6 (press fit for the bearing outer ring), with a shoulder; the remaining 5 mm has a Ø14 through hole for shaft clearance. Two M5 mounting slots go through the base along Z, 5.5 mm wide, 10 mm long along Y, centred at Y=±24, X=0.Model facts
- Overall size
- 12 × 60 × 37 mm
- Bodies
- 1
- Volume
- 11.5 cm³
Download
Check the geometry and dimensions in your own CAD tool or slicer before you make or use this part.





