← 示例
机械零件

608 轴承立式座

这是 CADlingo 根据下方提示词生成的模型。在工作台中打开,即可在 3D 中查看并检查剖面。

提示词

Pillow block bearing housing for one 608 ball bearing (Ø22 outside, 7 mm wide, Ø8 bore), one solid. Frame: the shaft axis is X, at Y=0, Z=20; the base sits on Z=0. Base plate: Y=-30..30, X=-6..6, Z=0..6. Housing: a cylinder Ø34 along X, X=-6..6, centred on the shaft axis, joined to the base by a web Y=-17..17, X=-6..6, Z=0..20. Bearing seat: Ø22 bore 7 mm deep from the face X=-6 (press fit for the bearing outer ring), with a shoulder; the remaining 5 mm has a Ø14 through hole for shaft clearance. Two M5 mounting slots go through the base along Z, 5.5 mm wide, 10 mm long along Y, centred at Y=±24, X=0.

模型信息

整体尺寸
12 × 60 × 37 mm
实体数
1
体积
11.5 cm³

下载

制作或使用前,请在您的 CAD 工具或切片软件中检查几何形状和尺寸。

在工作室中打开

有想做的零件吗?

打开一个示例,或者描述你真正需要的零件。

免费积分及当前活动