← 作例
機械部品

608ベアリング用ピローブロック

CADlingoが下のプロンプトから生成したモデルです。スタジオで開くと、3Dでの確認や断面表示ができます。

プロンプト

Pillow block bearing housing for one 608 ball bearing (Ø22 outside, 7 mm wide, Ø8 bore), one solid. Frame: the shaft axis is X, at Y=0, Z=20; the base sits on Z=0. Base plate: Y=-30..30, X=-6..6, Z=0..6. Housing: a cylinder Ø34 along X, X=-6..6, centred on the shaft axis, joined to the base by a web Y=-17..17, X=-6..6, Z=0..20. Bearing seat: Ø22 bore 7 mm deep from the face X=-6 (press fit for the bearing outer ring), with a shoulder; the remaining 5 mm has a Ø14 through hole for shaft clearance. Two M5 mounting slots go through the base along Z, 5.5 mm wide, 10 mm long along Y, centred at Y=±24, X=0.

モデル情報

全体サイズ
12 × 60 × 37 mm
ボディ数
1
体積
11.5 cm³

ダウンロード

製作や使用の前に、お使いの CAD ツールまたはスライサーで形状と寸法を確認してください。

スタジオで開く

つくりたい部品はありますか?

サンプルを開くか、必要な部品を言葉で伝えてみてください。

無料クレジット・キャンペーン情報