← 作例
機械部品

曲がった内部流路のマニホールドブロック

CADlingoが下のプロンプトから生成したモデルです。スタジオで開くと、3Dでの確認や断面表示ができます。

プロンプト

Manifold block, one solid, 60 x 40 x 30 mm. Frame: X=0..60, Y=0..40, Z=0..30. Main channel Ø6 in the plane Y=20: it enters the left face (X=0) at Z=8, runs along +X to X=25, turns upward through a 90° bend of 15 mm centreline radius (bend centre at X=25, Z=23), and runs up along Z to exit the top face at X=40. A second straight Ø4 channel enters the front face (Y=0) at X=15, Z=8 and runs along +Y until it joins the main channel. Each of the three openings has a Ø10 x 6 mm deep counterbore for a G1/8 port fitting. Four Ø4.5 through holes along Z for M4 bolts at (5,5), (55,5), (5,35) and (55,35).

モデル情報

全体サイズ
60 × 40 × 30 mm
ボディ数
1
体積
67.3 cm³

ダウンロード

製作や使用の前に、お使いの CAD ツールまたはスライサーで形状と寸法を確認してください。

スタジオで開く

つくりたい部品はありますか?

サンプルを開くか、必要な部品を言葉で伝えてみてください。

無料クレジット・キャンペーン情報