← 예시
기계 부품

곡선 내부 유로 매니폴드 블록

CADlingo가 아래 프롬프트로 만든 모델입니다. 스튜디오에서 열면 3D로 살펴보고 단면을 확인할 수 있습니다.

프롬프트

Manifold block, one solid, 60 x 40 x 30 mm. Frame: X=0..60, Y=0..40, Z=0..30. Main channel Ø6 in the plane Y=20: it enters the left face (X=0) at Z=8, runs along +X to X=25, turns upward through a 90° bend of 15 mm centreline radius (bend centre at X=25, Z=23), and runs up along Z to exit the top face at X=40. A second straight Ø4 channel enters the front face (Y=0) at X=15, Z=8 and runs along +Y until it joins the main channel. Each of the three openings has a Ø10 x 6 mm deep counterbore for a G1/8 port fitting. Four Ø4.5 through holes along Z for M4 bolts at (5,5), (55,5), (5,35) and (55,35).

모델 정보

전체 크기
60 × 40 × 30 mm
바디 수
1
부피
67.3 cm³

다운로드

제작하거나 사용하기 전에 사용하는 CAD 도구나 슬라이서에서 형상과 치수를 확인하세요.

스튜디오에서 열기

만들고 싶은 부품이 있나요?

예제를 열어보거나 실제 필요한 부품을 설명해보세요.

무료 크레딧·프로모션 안내