← Examples
Machine parts

Manifold block with a curved internal channel

CADlingo generated this model from the prompt below. Open it in the studio to inspect it in 3D and view sections.

The prompt

Manifold block, one solid, 60 x 40 x 30 mm. Frame: X=0..60, Y=0..40, Z=0..30. Main channel Ø6 in the plane Y=20: it enters the left face (X=0) at Z=8, runs along +X to X=25, turns upward through a 90° bend of 15 mm centreline radius (bend centre at X=25, Z=23), and runs up along Z to exit the top face at X=40. A second straight Ø4 channel enters the front face (Y=0) at X=15, Z=8 and runs along +Y until it joins the main channel. Each of the three openings has a Ø10 x 6 mm deep counterbore for a G1/8 port fitting. Four Ø4.5 through holes along Z for M4 bolts at (5,5), (55,5), (5,35) and (55,35).

Model facts

Overall size
60 × 40 × 30 mm
Bodies
1
Volume
67.3 cm³

Download

Check the geometry and dimensions in your own CAD tool or slicer before you make or use this part.

Open in studio

Have a part in mind?

Open an example or describe a part you actually need.

Free credits and current offers